Witter ZX303EU Clamp-On Anhængerkugelmonteret 3 Bike Cykelholder
Købe - login for at se priser og handle
| Producent | Witter |
| Artikel nummer | ZX303EU |
| Cykelholder system | Cykelholder monteret på anhængertræk |
| Antal cykler | 3 Cykel |
| Maks. nyttelast [i kg] | 51 |
| Diameter cykeldæk bredde [i mm] | 60 |
| Afstand mellem rails [i mm] | 160 |
| TUEV / DEKRA godkendelse | Nej |
| Maks. akselafstand [i mm] | 1300 |
| Produkt titel | Witter ZX303EU Clamp-On Anhængerkugelmonteret 3 Bike Cykelholder |
| Kan udviddes til 3.cykel | Nej |
| Belysning | Standard |
| Maks. vægt pr. cykel [i kg] | 17 |
| Stelrørs diameter [in mm] | 60 |
| Aftagelige støttearme | Ja |
| Kan udviddes til 4.cykel | Nej |
| Tyverisikring | Ja |
| afstand fra køretøj [in mm] | 600 |
| Aftagelige klør ? | Nej |
| Fuldt samlet | Nej |
| Monteringstid på [min] | 0 |
| Kun egnet til flangeanhængertræk? | Nej |
| Monteringstid til [min] | 15 |
| Garanti | 3 års |
| Folding for opbevaring | Nej |
| Vægt [kg] | 17.4 |
The ZX303EU bike carrier from Witter is platform based and takes up to three cycles of any size including a child’s.
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)