Witter Fixed Flange Towbar (two hole faceplate)
13 Pins Wiring Kit Universal
info
7 Pins Wiring Kit Universal
info
Trade - Log in to view pricing and buy
Important! This product is vehicle specific but you have not selected your vehicle. Please select your vehicle to ensure it is compatible.
| Manufacturer | Witter |
| Part Number | SU27A |
| Nose Load [kg] | 82 |
| Towed Weight [kg] (Check the vehicle towing limit) |
2000 |
| Bumper cut-out | Invisible cut-out |
| D-Value [kN] | 9.95 |
| Mounting Time from (minutes) | 90 |
| Mounting Time up to [min] | 150 |
| Towbar system | Witter Fixed Flange Towbar (two hole faceplate) |
| Bumper removal requirement | Yes |
| Do I need to order a towball? | No |
| Bumper cut Dimension [in mm] | 80 x 120 |
| KIT | No |
| Drilling required? | Yes |
| Ball height unladed [in mm] | 410 |
| Ball height laded [in mm] | 380 |
| Test Mark | 00-4930 |
| Weight [kg] | 22.486 |
| not for trim level | R-Spec, Outback |
Traditionally used in the UK for all serious forms of towing and generally the most cost effective option. A 50mm towball is bolted to a two hole faceplate that also allows the fitting of accessories such as towbar mounted cycle carriers or bumper protection plates. Please be aware that the fairly bulky shape may set off parking sensors when your car is not in towing mode.
Vehicle Compatibility
Product PDFs
Fitting instructions for Witter Fixed Flange Towbar (two hole faceplate) Download
Wiring Kits
