Witter Fixed Swan Neck Towbar
13 Pins Wiring Kit Vehicle-specific
info
7 Pins Wiring Kit Vehicle-specific
info
13 Pins Wiring Kit Universal
info
7 Pins Wiring Kit Universal
info
Trade - Log in to view pricing and buy
Important! This product is vehicle specific but you have not selected your vehicle. Please select your vehicle to ensure it is compatible.
| Manufacturer | Witter |
| Part Number | KA42S |
| Nose Load [kg] | 100 |
| Towed Weight [kg] (Check the vehicle towing limit) |
2500 |
| Bumper cut-out | Invisible cut-out |
| D-Value [kN] | 12.6 |
| Mounting Time from (minutes) | 60 |
| Mounting Time up to [min] | 90 |
| Bumper removal requirement | Yes |
| Do I need to order a towball? | No |
| Towbar system | Witter Fixed Swan Neck Towbar |
| KIT | No |
| Drilling required? | No |
| Bumper cut Dimension [in mm] | 200 x 60 |
| Ball height laded [in mm] | 420 |
| Ball height unladed [in mm] | 450 |
| Test Mark | 55R-01 10591 |
| Weight [kg] | 23.853 |
The swan neck towbar design is generally perceived as more slick but no additional accessories can be installed. Most towball mounted bike carriers are suitable for this type of towbar but be aware that this means that you cannot tow at the same time. Due to its less intrusive design this type of towbar is less likely to set off parking sensors when your car is not in towing mode. The towbar neck of this Witter towbar type can be upgraded to a Witter detachable neck.
Vehicle Compatibility
Product PDFs
Fitting instructions for Witter Fixed Swan Neck Towbar Download
Wiring Kits
