Witter ZX303EU Clamp-On Anhængerkugelmonteret 3 Sykkelholder
Handel - Logg inn for å se priser og kjøpe
| Produsent | Witter |
| Delenummer | ZX303EU |
| Sykkelholder system | Sykkelholder montert på tilhengerfeste |
| Antall sykler | 3 sykkel |
| Maks. nyttelast [i kg] | 51 |
| Diameter sykkeldekk bredde [i mm] | 60 |
| Avstand mellom rails [i mm] | 160 |
| TUEV / DEKRA godkjenning | Ingen |
| Maks. akselavstand [i mm] | 1300 |
| Produkt tittel | Witter ZX303EU Clamp-On Anhængerkugelmonteret 3 Sykkelholder |
| Kan utvides til 3. sykkel? | Ingen |
| Belysning | Standard |
| Maks. vekt per sykkel [i kg] | 17 |
| Diameter sykkelrammer [i mm] | 60 |
| Avtakbare støttearmer | Ja |
| Kan utvides til 4. sykkel? | Ingen |
| Tyverisikring | Ja |
| avstand fra kjøretøy [i mm] | 600 |
| Avtakbare klør? | Ingen |
| Fullt montert | Ingen |
| Monteringstid fra [min] | 0 |
| Kun egnet for flenshengerfeste? | Ingen |
| Monteringstid på [min] | 15 |
| Garanti | 3 års |
| Folding for lagring | Ingen |
| Vekt [kg] | 17.4 |
The ZX303EU bike carrier from Witter is platform based and takes up to three cycles of any size including a child’s.
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)
Kjøretøyskompatibilitet
PDF-filer for produkt
Monteringsanvisning for Witter ZX303EU Clamp-On Anhængerkugelmonteret 3 Sykkelholder Last ned