Witter ZX303EU Clamp-On dragkroksmonterad cykelhållare för 2 cyklar
till BMW i4 (G26) 2021—
Byt fordonHandel - Logga in för att se priser och beställa
Tillverkare | Witter |
Artikelnummer | ZX303EU |
Cykelhållare system | Dragkroksmonterade cykelställ |
Antal cyklar | 3 cyklar |
Max nyttolast [i kg] | 51 |
Diameter cykeldäck bredd [i mm] | 60 |
Avstånd mellan skenorna [i mm] | 160 |
TUEV / DEKRA godkänd | Nej |
Max hjulbas [i mm] | 1300 |
Produkt titel | Witter ZX303EU Clamp-On dragkroksmonterad cykelhållare för 2 cyklar |
Kan utökas till 3 cyklar? | Nej |
Belysning | Standard |
Max vikt per cykel [i kg] | 17 |
Diameter cykelramar [i mm] | 60 |
Avtagbara stödarmar | Ja |
Kan utökas till 4 cyklar | Nej |
Stöldskydd | Ja |
Avstånd från fordon (i mm) | 600 |
Avtagbara klor | Nej |
Färdig monterad | Nej |
Monteringstid från (min) | 0 |
Endast lämplig för fläns dragkrokar? | Nej |
Monteringstid till [min] | 15 |
Garanti | 3 år |
Hopfällbar för förvaring | Nej |
Vikt [kg] | 17.4 |
The ZX303EU bike carrier from Witter is platform based and takes up to three cycles of any size including a child’s.
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)